View STB10NK60ZT4_4249630.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB10NK60Z/-1- STP10NK60Z STP10NK60ZFP - STW10NK60Z
N-channel 600V - 0.65 - 10A - I2/D2PAK - TO-220/FP - TO-247 Zener-protected SuperMESHTM Power MOSFET
General features
Type STB10NK60Z-1 STB10NK60Z STP10NK60Z STP10NK60ZFP STW10NK60Z

VDSS @TjMax 650V 650V 650V 650V 650V
RDS(on) <0.75 <0.75 <0.75 <0.75 <0.75
ID 10A 10A 10A 10A 10A
Pw 115W 115W 115W 35W 156W
3 1 2
1 2
3 12
TO-247
3 1
TO-262
TO-263
3
Extremely high dv/dt capability 100% Avalanche tested Gate charge minimized Very good manufacturing repeability
TO-220FP
TO-220
Description
The SuperMESHTM series is obtained through an extreme optimization of ST's well established strip-based PowerMESHTM layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications.
Internal schematic diagram
Applications
Switching application
Order codes
Part number STB10NK60Z-1 STB10NK60ZT4 STP10NK60ZFP STP10NK60Z STW10NK60Z Marking B10NK60Z B10NK60Z P10NK60ZFP P10NK60Z W10NK60Z Package IPAK DPAK TO-220FP TO-220 TO-247 Packaging Tube Tape & reel Tube Tube Tube
September 2006
Rev 9
1/19
www.st.com 19
Contents
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Electrical characteristics (curves) ........................... 7
3 4 5 6
Test circuits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Value Symbol Parameter TO-220 D/IPAK VDS VGS ID ID IDM (2) PTOT Drain-source voltage (VGS = 0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor Vesd(G-S) G-S ESD (HBM C=100pF, R=1.5k) dv/dt (3) VISO Tj Tstg
2.
Unit TO-220FP 600 30 TO-247 V V
(1) (1)
10 5.7 36 115 0.92
10 5.7
10 5.7 36 156 1.25
A A A W W/C V V/ns
36 (1) 35 0.28 4000 4.5
Peak diode recovery voltage slope Insulation withstand volatge (DC) Operating junction temperature Storage temperature --
2500 -55 to 150
--
V C
1. Limited only by maximum temperature allowed Pulse width limited by safe operating area 3. ISD <10A, di/dt < 200A/s, VDD =80% V(BR)DSS
Table 2.
Thermal data
TO-220 IPAK DPAK TO-220FP TO-247 3.6 60 62.5 300 50 0.8 Unit C/W C/W C/W C
Rthj-case Thermal resistance junction-case Max Rthj-pcb Thermal resistance junction-pcb Max (when mounted on minimum footprint)
1.09
Rthj-amb Thermal resistance junction-amb Max Tl Maximum lead temperature for soldering purpose
3/19
Electrical ratings
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Table 3.
Symbol IAR EAS EAR
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) Single pulse avalanche energy (starting Tj=25C, ID=IAR, VDD= 50V) Repetitive avalanche energy (pulse width limited by Tj max) Max value 9 300 3.5 Unit A mJ mJ
4/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Electrical characteristics
2
Electrical characteristics
(Tcase =25C unless otherwise specified) Table 4.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On /off states
Parameter Test conditions Min. 600 1 50
10
Typ.
Max.
Unit V A A A V
Drain-source breakdown ID = 250A, VGS= 0 voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance VDS = Max rating, VDS = Max rating, Tj=125C VGS = 15V, VDS = 0 VDS= VGS, ID = 250 A VGS= 10 V, ID= 4.5 A
3
3.75 0.65
4.5 0.75
Table 5.
Symbol gfs (1) Ciss Coss Crss Coss eq(2) Qg Qgs Qgd
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent ouput capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =15V, ID = 4.5A Min. Typ. 7.8 1370 156 37 90 50 10 25 70 Max. Unit S pF pF pF pF nC nC nC
VDS =25V, f=1 MHz, VGS=0
VGS=0, VDS =0V to 480V VDD=480V, ID = 8A VGS =10V (see Figure 19)
1. Pulsed: pulse duration = 300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80%
5/19
Electrical characteristics
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Table 6.
Symbol td(on) tr td(off) tf tr(Voff) tf tc
Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Off-voltage rise time Fall time Cross-over time Test conditions VDD=300 V, ID=4A, RG=4.7, VGS=10V (see Figure 20) VDD=300 V, ID=4A, RG=4.7, VGS=10V (see Figure 20) VDD=480 V, ID=8A, RG=4.7, VGS=10V (see Figure 20) Min. Typ. 20 20 55 30 18 18 36 Max Unit ns ns ns ns ns ns ns
Table 7.
Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM
2.
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=10A, VGS=0 ISD=8A, di/dt = 100A/s, VDD=40 V, Tj=150C 570 4.3 15 Test conditions Min. Typ. Max. Unit 10 36 1.6 A A V ns C A
1. Pulse width limited by safe operating area Pulsed: pulse duration = 300s, duty cycle 1.5%
Table 8.
Symbol BVGSO(1)
Gate-source zener diode
Parameter Gate-source breakdown voltage Test conditions Igs= 1mA (open drain) Min 30 Typ Max Unit V
1. The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device's ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated Zener diodes thus avoid the usage of external components
6/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Electrical characteristics
2.1
Figure 1.
Electrical characteristics (curves)
Safe operating area for TO-220 / IPAK / DPAK Figure 2. Thermal impedance for TO-220 / IPAK / DPAK
Figure 3.
Safe operating area for TO-247
Figure 4.
Thermal impedance for TO-247
Figure 5.
Safe operating area for TO-220FP
Figure 6.
Thermal impedance for TO-220FP
7/19
Electrical characteristics Figure 7.
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Figure 8. Transfer characteristics
Output characterisics
Figure 9.
Transconductance
Figure 10. Static drain-source on resistance
Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations
8/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Figure 13. Normalized gate threshold voltage vs temperature
Electrical characteristics
Figure 14. Normalized on resistance vs temperature
Figure 15. Source-drain diode forward characteristics
Figure 16. Maximum avalanche energy vs temperature
Figure 17. Normalized BVDSS vs temperature
9/19
Test circuits
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
3
Test circuits
Figure 19. Gate charge test circuit
Figure 18. Switching times test circuit for resistive load
Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit
Figure 22. Unclamped inductive waveform
Figure 23. Switching time waveform
10/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
11/19
Package mechanical data
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
oP
Q
12/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Package mechanical data
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
G
13/19
Package mechanical data
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
TO-247 MECHANICAL DATA
mm. MIN. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 0.140 0.177 0.216 14.80 4.30 0.560 0.14 0.728 0.143 0.216 TYP MAX. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 MIN. 0.19 0.086 0.039 0.079 0.118 0.015 0.781 0.608 0.214 0.582 0.17 inch TYP. MAX. 0.20 0.102 0.055 0.094 0.134 0.03 0.793 0.620
DIM. A A1 b b1 b2 c D E e L L1 L2 oP oR S
14/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Package mechanical data
TO-262 (I2PAK) MECHANICAL DATA
mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch
15/19
Package mechanical data
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
1
16/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Package mechanical data
5
Package mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
17/19
Revision history
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
6
Revision history
Table 9.
Date 29-Sep-2005 29-Oct-2005 11-Apr-2006 19-Sep-2006
Revision history
Revision 6 7 8 9 Inserted ecopack indication New value inserted in Table 5 New template Unit changed in Table 4 Changes
18/19
STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
19/19

▲Up To Search▲

Price & Availability of STB10NK60ZT4

	To Download STB10NK60ZT4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .